While the drawer fronts are drying, use Fusion’s Micro Fibre Roller and tray to apply two coats of Ash on the dresser. Wait 9 hours between coats to ensure sufficient dry-time Use a natural bristle brush to apply SFO in Cappuccino on the drawer fronts.
Use a heavy sanding block, wrapped with 220 grit paper to scuff sand the rest of the dresser.Ĭlean up dust residue with tack cloth. You’re using the orbital sander to remove the previous finish so that the SFO can penetrate the wood. Wipe down the whole piece with Fusion TSP, and sand the drawers with 120 grit. Start by removing the hardware and drawers from the base.
JUMP PAINT HWO TO USE HOW TO
How to prepare a piece for painting and staining Starting from an existing piece, you’ll need Fusion TSP, an Orbital Sander with 120 Grit (to strip the drawers), 220 grit paper (to scuff the rest of the piece), Fusion Mineral Paint in Ash, a Fusion Microfiber Roller Kit, Homestead House Stain and Finishing Oil “Cappuccino,” as well as Fusion Beeswax Finish. What do you need to finish a piece in two tones? Follow along to see how to create a two-tone effect using Fusion’s Mineral Paint and SFO. Have you spotted a two-tone piece that you love, but weren’t sure how doable the whole project was? Well, with the right materials any piece can look custom and expensive.
0 kommentar(er)
